Usually not. The machine and the tools ship separately, so a kit arrives in several parcels on different days. Every parcel is tracked and free; you are never charged per box.

If a week passes after the last tracking update and something on your list has not arrived, email us and we chase it or send it again.

Orders are processed within 2 business days. Most items arrive in one to two weeks; machines and heavier items in two to three weeks. Shipping is free and tracked.

Canada, Australia and New Zealand get the same delivery times as the US.

The lathes, the engraving ball vise and the 13-piece watchmaker's screwdriver set ship from a US warehouse to US addresses and arrive faster.

Every product page shows its own delivery time.

Two to three weeks, free and tracked. Processing takes up to 2 business days, then the machine ships to you directly from the workshop that builds it.

The machine arrives fully assembled. The Bench Kit includes the press, the speed-control power adapter, the chuck key, a 3 mm hex key and a spare drive belt. The speed dial (400-4500 rpm) is on the adapter, so you do not need a separate variable power supply.

To hold the work, the Watchmaker and PCB kits include the drill press vise. To bolt the vise down under the chuck, add the 120 × 150 mm base plate. For bits, the PCB Kit includes a 10-piece cobalt set, 0.5-3 mm.

A round rubber belt - a thick rubber ring sitting in the groove of two stepped pulleys. You change speed by lifting it onto the other step with your fingers. Five seconds, no tools.

It is not a toothed belt. Toothed, or synchronous, belts belong to the heavier machine in this family, the one with the 120 W brushless motor, and they need toothed pulleys. Ours are smooth, so a toothed belt has nothing to grip and will not fit. We sell the round one as a spare, and for the first twelve months we post you one free if yours goes.

Yes. The power adapter is rated 100-240 V, 50/60 Hz, so no converter is needed anywhere we ship.

US and Canada: the adapter has US plug blades and goes straight into your outlet.

Australia and New Zealand: the voltage is fine, and drill press kits and the collet drill press ship with a free AU/NZ pin adapter.

This is a drill press, built for straight, accurate holes. Milling needs a collet spindle in place of the drill chuck, and we will add one to the shop once we have it.

For hand engraving, the engraving ball vise holds the piece and turns in every direction under the graver.

Yes, with diamond bits rather than steel ones, and only if you keep the tip wet. A twist drill skates on glass and then cracks it. A diamond bit does not cut at all - the grit grinds through, slowly, under the weight of the quill and nothing more.

Water is the whole trick. Run dry and the grit comes off the tip in under a minute, and people then assume the bit was faulty. A shallow puddle on the work is enough.

We sell them in packs of ten of one size, 2.35 mm shank, which drops straight into this chuck.

Brass and aluminum up to 1 mm; wood, plastic and PCB up to 4 mm. The press runs at 30 W, 12 V and is made for small, precise holes. It is not made for steel.

Our tools are made by specialist workshops in China, like most tools at this price. ARVONELLE is a US company in Feasterville, Pennsylvania: we handle your order, support, returns and the 12-month parts promise.

Email us and say which part. For twelve months we send you a new one free. No return and no inspection needed. Drive belts, chucks and speed adapters are all stocked.

You have 30 days from delivery to return an item in its original packaging, sale items included. If it arrived faulty or not as described, we pay the return label. If you changed your mind, the return postage is yours. The same terms apply in the US, Canada, Australia and New Zealand.

Yes. We ship free and tracked to Canada, Australia and New Zealand on the same terms as US orders: no minimum, no surcharge, no charge per parcel, and the same delivery times.

Drill presses ship to Australia and New Zealand, not to Canada. The lathes, the engraving ball vise and the 13-piece watchmaker's screwdriver set ship to US addresses only. Checkout only offers the countries an item can go to.

We do not collect Australian GST at checkout. The UK and the EU are not open yet.

ARVONELLE is operated by FUSE REPAIR APPLIANCE LLC, a US company in Feasterville, Pennsylvania.

A real person answers within one business day: email support@arvonelle.com or text (610) 244-1495. Every order comes with free tracked shipping, 30-day returns and 12 months of free replacement parts, no return needed.